Home | About | Products | Certification | Contacts
ALUMINIUM PACKAGING
THE ULTIMATE PROTECTION FOR PHARMACEUTICALS AND CHEMICALS

Metalco has registered a Type III (packaging) DMF with the USFDAwhich is updated and enriched annually.
The European Pharmacopeia considers pure aluminium (min.99,5%) containers as safe and neutral for contact with
Food and Drugs when produced and used according to GMP.

The European Pharmacopeia and USFDA consider aluminium containers (Alu 99.5%min) when produced and used according to GMP rules, as safe and neutral for contact with foods and drugs. Seamless aluminium containers are indeed completely neutral either from a mechanical point of view (they are resistant to schocks, perforation, cuts, etc..) of from chemical one ( Alu cans gives absolute protection to cold and heat, to light and gas permeation, etc..) METALCO has worked in partnership with the mayor pharmaceutical users to increase the final surface treatment of alu cans for sterile powders. METALCO also guarantee the level of cleanliness according to USFDA. Alu containers produced by METALCO can be conveniently sterilised, after washing and rinsing, using dry heat sterilisation or autoclaving; they are even found to be pyrogen free, when tested.

Specific Surface treatment

Seamless aluminium cans can be supplied pickled and washed (ultra-clean washing), or anodised for pharmaceuticals powders as APIs.

High Resistance

Seamless aluminium cans are resistant against shocks, perforations, cuts, cold andheat. They also give absolute protection to light and gas permeation.

Easy sterilisation Depyrogenations

Dry heat sterilisation allows in one single step the sterilisation and depyrogenation of the cans. Autoclaving can also be used for sterilisation alone. When tested before dispatch, our cans have been found to be pyrogen free.

EASY TO USE closing systems

Metalco provides close regulatory support, but also accessories in addiction to its containers range. Several closing systems and accessories will bring smooth and reliable use for your confort and safety.

OPTIONAL:

  • Anodization which improves cleanliness and guarantees better chemical and mechanical aluminium properties.

 
 
 
 

220 MM OPENING WITH ALUMINIUM LID, NITRILE RING WAD AND CLAMPING RING

TYPE 840: internal diameter of neck 220 mm
Cod.
Art.
Cap.
ml.
D d H h
/30 30000 300 220 475 390
/25 25000 300 220 408 320
/20 20000 300 220 332 240
/18 18000 300 220 305 215
 
 
 
 

135 MM OPENING WITH PUSH-IN CHLOROBUTYL PLUG REINFORCED BY AN ALUMINIUM DISC AND ALUMINIUM CAP FOR SEALING

TYPE 810: internal diameter of neck 135 mm
Cod.
Art.
Cap.
ml.
D d H h
/30 28700 300 135 462 362
/25 25500 300 135 425 325
/20 19750 300 135 340 235
/18 18400 300 135 320 215
/12 11900 220 135 377 305
/6 6250 175 135 310 245
/5 5500 175 135 280 215
 
 
 
 

101 MM OPENING WITH PUSH-IN CHLOROBUTYL PLUG AND ALUMINIUM CAP FOR SEALING

TYPE 820: internal diameter of neck 101 mm
Cod.
Art.
Cap.
ml.
D d H h
/30 28700 300 101 465 360
/25 25500 300 101 425 325
/22 22000 300 101 375 275
/20 19750 300 101 340 235
/18 18400 300 101 320 215
/12 11900 220 101 377 305
/6 6250 175 101 310 245
/5 5500 175 101 280 215
/4 4000 175 101 220 155
 
 
 
 

23 MM OPENING SMALL BOTTLES FOR SAMPLING AND STABILITY TESTS

TYPE 880: internal diameter of neck 23 mm
Cod.
Art.
Cap.
ml.
D d H h
/01 1250 85 23 275 215
/006 625 75 23 186 120
/001 125 50 23 105 75
/0006 65 45 23 58 28
 

Tel. +39 0583 22090 / 229173
Fax +39 0583 22109


Via Mulino, 44
55015 Montecarlo (LU) - Italy
P.Iva 01704300464
Cap Sociale Euro 100.000,00

[email protected]
www.metalco-alupack.eu


Home | About | Products | Certification | Contacts | Privacy Policy | Cookie Policy




powered by Paralleloweb